An Australian made hydraulic passenger lift. Requires minimal maintenance. Optional single or dual door access. Suitable for commercial buildings.
General Details
Extra product information
LIFT FEATURES:
Quiet smooth hydraulic operation
Battery return to ground level in case of power failure
No motor room is required
Very space efficient
Speed .15m/sec (9m/min) .25m/sec - .3m/sec optional
Maximum travel:
1 metre (HW14)
7 metres (HW15)
12 metres (HW16)
Half cars (subject to lifting height) or fully enclosed cars
Platforms are available in various sizes
Lift car and door frames are available in a variety of colours
Options
Lift car with full roof
Open crossover roof design
Automatic door openers
Hands free telephone
Interior car fit out to your design
Enclosures to your design
Various door finishes & designs
Installation
In the ACT, the Scaffolding and Lifts Regulation 1950 requires the installer of the lift (the Lift Company) to submit a 'Notice of Intention to Erect or Alter a Lift'. This applies to all lifts including service lifts and disabled access lifts. All lifts that are installed in the ACT need to comply with the current Lift Code of Australia.
Once the lift is erected, the lift company will contact WorkCover to arrange a "pre-commissioning inspection and test " on the lift (both new and upgraded). WorkCover charges an initiation fee of $39.10 plus $26.65 per hour for this service. (This fee is revised regularly). There is no requirement for the owner to arrange an annual inspection. For more information, contact ACT WorkCover on 6205 0200.
Information correct April 2007
Manufacturer/Country
Harwel/Australia
Warranty
Contact Supplier for Details
Websites
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Models / Specifications
Model Harwel Hydraulic Passenger Lifts: Lifts designed to suit individual needs.
- Load Capacity (supplier stated) 884 kg (Or 13 persons.)
- Height of Lift 12000 mm (Maximum height of travel of the lift.)
- Width of Door Access 900 mm (Can be customised.)
- Height of Entry Doorway 2100 mm
- Width Internal 1100 mm (Internal width of passenger car.)
- Depth Internal 2100 mm (Internal depth of passenger car.)
Suppliers (1)
Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.
All Suppliers
Harwell Lifts Pty Ltd (manufacturer) (Gloucester)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
NSW Suppliers
Harwell Lifts Pty Ltd (manufacturer) (Gloucester)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.