General Details
Caution
All pressure reduction products must be monitored to prevent 'bottoming out'. This occurs when the user's weight bears down so hard on the product material that it is flattened and the bony parts are pressed against the surface below the cushion or mattress. Where bottoming out occurs even with correct use (eg correct inflation levels), a different product may need to be considered.
Extra product information
STRUCTURE
Two layers of 125mm PVC cells. The top layer has alternating pressure, the bottom layer remains inflated (static). The top three cells in the top layer also remain static
Transport capability - a plug can be inserted in the ends of the connecting tubes to maintain inflation of the mattress.
Quick release cell connectors
ATTACHMENT Straps are attached to the mattress for fitting to the bed frame.
PUMP / CONTROLS
Cavalier:
Analogue pressure switch
Power failure switch
Low pressure indicator
Royal:
Digital push button pressure controls
Can operate in 3 modes:
1) adjustable pressure and alternating cycle (5 - 30 minutes)
2) static (pressure can be adjusted to very low - soft)
3) fully inflated for patient care or to facilitate transfers (maximum time 30 minutes)
COVER
Two way stretch, breathable, PU, zippered
SAFETY FEATURES
CPR release (turn knob to release)
Battery backup - lasts 3 - 4 hours
Pump beeps if power failure occurs
OPTIONS
low air loss cells can be added
CLEANING REQUIREMENTS
Wipe over with damp cloth
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Suppliers (4)
Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.
- All
- ACT
- NSW
- NT
- QLD
- SA
- TAS
- VIC
- WA
There are no suppliers of this product.
All Suppliers
Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
NSW Suppliers
Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
ACT Suppliers
Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.