1300 885 886 Independent Living Centres Advisory Service

Dux Endurance Plus Gas Hot Water System (PR05194)

17359 pr05194%20dux%20endurance%20plus%20gas%20hot%20water%20system

Dux Endurance Plus Gas Hot Water System

https://ilcaustralia.org.au/products/5194

This continuous flow gas hot water system features an all weather powder coated finish and an anti frost element. The maximum temperature is preset at 50 degrees Celsius. A range of optional controllers is also available to enable the variation of the water temperature from the kitchen, bathroom or en-suite.

General Details

Extra product information

Bathroom and en-suite controllers can be fitted in addition to the main controller, allowing the temperature to be conveniently adjusted from different rooms eg. if the main controller in the kitchen has been set at maximum temperature for dishwashing, pressing the transfer button on a second controller in the bathroom allows a person in the bathroom to easily reduce the temperature for the purposes of showering or safely bathing the children.

The National Plumbing Code states that, for new homes and substantial renovations, hot water supplied to hygiene areas must be limited to 50 degrees Celsius.

The Endurance Controller also features a priority indicator which warns the user whether someone in the house is currently using hot water prior to resetting the water temperature.

Options

Additional temperature controllers for different rooms.

Installation

Must be installed by a licensed plumber.

Manufacturer/Country
Australia
Websites
- http://storage.dux.com.au/products/4_owner_manual.pdf

Models / Specifications

Model 20 litres/min: Medium
  • Depth Overall 194 mm
  • Weight Overall 15 kg
  • Height Overall 571 mm
  • Width Overall 350 mm
Model 26 litres/min: Large
  • Height Overall 571 mm
  • Width Overall 350 mm
  • Depth Overall 194 mm
  • Weight Overall 16 kg
Model 32 litres/min: Extra Large
  • Width Overall 470 mm
  • Height Overall 644 mm
  • Depth Overall 244 mm
  • Weight Overall 29 kg
Model 16 litres/min: Small
  • Depth Overall 194 mm
  • Width Overall 350 mm
  • Weight Overall 15 kg
  • Height Overall 571 mm

Suppliers (2)

Agents (0)

    Importers (0)

      Manufacturers (0)

        Maintenance

        Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

        Standards

        Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation

        Disclaimer

        Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.