A mobile, battery powered patient lifter which brings a person from sitting to a supported standing position. The sling attaches to the hoist using keyhole fittings and the mast has two handles designed for the occupant to hold. There are two separate knee supports and a fixed footplate. Integrated scales are available as an option. Controls are operated electrically.

General Details

Caution

This stand up lifter is designed to assist with the stand transfer of a person from a seated position to a seated position. They need to have the ability to weight bear to some extent and have the cognitive skills to follow directions such as leaning back into the sling.

Stand up hoists are not designed to promote standing skills nor raise someone to a full standing position, knees should remain partly flexed at all times.

Method of Use

This stand up hoist is designed to assist with the standing transfer of a person from one seated position to another seated position. The person needs to have the ability to weight bear except where a four point sling is to be used.

The use of the under arm torso sling, weight bearing footplate and a cushioned contoured knee pad provide the three points of support. It is preferable if the person can hold onto the hand grips to assist the standing process. The person needs to be able to lean back into the sling for it to be effective.

This style of hoist is useful for toileting and dressing tasks as it provides full access for attending to lower garments.

Options

Also available with transfer sling

Extra product information

FRAME
The frame is grey powder coated steel, push handles are green and the footplate and knee pads are blue. It has a single, angled mast which the battery attaches to. The actuator is positioned between the mast and knee pads.

BASE
is U-shaped and has hinges at the rear of adjustable width. A manually operated foot pedal mechanism is standard for leg width adjustment. A battery powered leg width adjustment is optional.

BOOM
is angled and has two keyhole attachment points for the sling. Two rubber horizontal handles are on either side of the boom for the occupant to place their hands. Alternatively, if the client prefers they can grip the boom in the vertical plane. The boom lifts in an arced plane.

CASTORS
are dual swivel castors at the front. The rear castors are large, single and lockable.

PUSH HANDLES connects near the top of the mast. Ring shape which is open medially.
FOOTPLATES
are fixed and rectangular with a plastic slip resistant surface and raised edges to the front and sides
.
KNEE PADS
are padded, slip resistant and contoured. Two separate knee pads allow for movement using a spring mechanism. Individual calf support webbing straps.

CONTROLS
are hand held on an extendible cord and hook on its rear to position on the frame. Extra push buttons are mounted to the top of the mast to raise and lower the boom. Push buttons on hand held control is standard to raise and lower, and optional to widen or narrow the legs.

POWER SOURCE
there is a light indication for level of charge in the battery.

SERVICE METER
displays the total motor usage time to record total amount the unit is being utilised in hours.

BATTERY RECHARGING
occurs by removing the battery and connecting it to the separate recharger at a power point.

TRANSPORT
to dismantle, the base and mast can be split using an allen key.

SLINGS
are padded with two keyhole attachment points, each given two lengths. Padded section for under the arms. Chest strap has two plastic buckles. Internal surface has a slip resistant material. Available in a range of sizes that are colour coded.
Extra large - blue
Large - green
Medium - Yellow
Small - red

Each sling is labelled with the load capacity, manufacturer, size and serial number.

Safety and Usage Advice

Emergency cut off switch is red, and located at the top of the mast. Automatic safety cut out if lowered onto an obstacle. An emergency lowering device is standard.

Manufacturer/Country

ArjoHuntleigh/Poland

Warranty

One year guarantee, excluding batteries

Websites

Maintenance

Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

Models / Specifications

Model Sara 3000 : Stand up hoist

  • Load Capacity (supplier stated) 200 kg
  • Weight Overall 62 kg
  • Height of Base 110 mm
  • Length Overall 1040 mm
  • Height of Lift 912 mm - 1715 mm
  • Height 1140 mm
  • Width of Base External 630 mm
  • Width Internal of Open Base 895 mm

Features

Contact listed suppliers to confirm features, options and models available.

Movement of Transfer

Adaptations for use

Material

Suppliers (2)

Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.

There are no suppliers of this product.

All Suppliers

Apollo Healthcare Technologies (Wangara)

Supplier Code Price & Price Notes Hire? Repair? Availability
P.O.A unknown unknown

Arjo Australia (Canning Vale, Clayton, Macquarie Park, Murarrie, Regency Park)

Supplier Code Price & Price Notes Hire? Repair? Availability
0.0 - 0.0 unknown unknown

ACT Suppliers

Arjo Australia ()

Supplier Code Price & Price Notes Hire? Repair? Availability
0.0 - 0.0 unknown unknown

NSW Suppliers

Arjo Australia (Macquarie Park)

Supplier Code Price & Price Notes Hire? Repair? Availability
0.0 - 0.0 unknown unknown

NT Suppliers

Arjo Australia ()

Supplier Code Price & Price Notes Hire? Repair? Availability
0.0 - 0.0 unknown unknown

QLD Suppliers

Arjo Australia (Murarrie)

Supplier Code Price & Price Notes Hire? Repair? Availability
0.0 - 0.0 unknown unknown

SA Suppliers

Arjo Australia (Regency Park)

Supplier Code Price & Price Notes Hire? Repair? Availability
0.0 - 0.0 unknown unknown

TAS Suppliers

Arjo Australia ()

Supplier Code Price & Price Notes Hire? Repair? Availability
0.0 - 0.0 unknown unknown

VIC Suppliers

Arjo Australia (Clayton)

Supplier Code Price & Price Notes Hire? Repair? Availability
0.0 - 0.0 unknown unknown