General Details

Extra product information

The hoist is constructed from epoxy coated steel tube. The single mast is upright and incorporates a rectangular push handle. The arc of the lift is vertical. The curved lifting boom can be adjusted to different types of spreader bars or cradles.

SLINGS
Purchased separately to the hoist, with a large range and customisation available.

CASTORS
00mm diameter double swivel castors on the front and rear or manoeuvrability, with foot operated lock brakes on rear.

ELECTRIC CONTROLS
Hand held control on an extendable cord with separate buttons for raising and lowering hoist. The legs of the U shaped base are also adjusted in width electrically via the hand held control. The hand piece hooks onto the mast when not in use.

POWER SOURCE
12V removable battery pack mounted on the mast of the hoist. A flashing red light on the battery pack indicates low battery charge.

BATTERY RECHARGING
The charger provided is connected to a mains power point and plugged into the hoist at the charging terminal.

Options

Range of accessories available (Slings and attachments).

4 Point positioning Cradle: enables the carer to position by rotating the cradle into either a fully seated or reclined orientation. The 4 Point cradle offers the ''Securi3'' sling attachment system. This safety device ensures that the sling won't unhook from the cradle attachment during use.

Manufacturer/Country

Oxford / UK

Warranty

2 Years

Websites

• Oxford Stature Patient Lifter - https://www.aidacare.com.au/products/manual-handing-transfer/lifters-hoists/portable-hoists/oxford-stature-patient-lifter/

Maintenance

Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

Models / Specifications