General Details

Extra product information

Materials
The gel pad is non-removeable and surrounded by moulded foam. The moulded foam base cushion has two gentle leg troughs with a pommel at the front.

Cover
The removable, breathable (vapour permeable) two way stretch cover is water resistant and has an anti-slip base. The Plus cushion is available in the colour Fuschia. A fluid and water resistant Platilon liner (clear), located under the two way stretch cover, is optional. All Invacare Flo-Tech wheelchair cushions are fitted with an outer black material cover as standard.

Options

The following outer covers are available:
Black smooth cover (also known as Ingress Resistant)
Black wipe down cover
Black towelling cover

Cleaning Requirements

Fuschia Polyurethane cover:
For general cleaning the supplier recommends use of a solution neutral detergent and hot water or alternatively a 0.1% hyperchloride solution, to wipe down the cushion cover. Following application, the cover should be rinsed with clean water (damp cloth) and thoroughly dried. Removable contaminated covers should be laundered at 71 degrees C with a dilute detergent solution. Covers should be thoroughly rinsed and dried before being placed back onto the cushion.
Ingress Resistant cover:
As above, however the supplier states that it is necessary to re-activate the fluorocarbon finish after laundering. They state that this is best achieved by laundering the cover at a temperature of 80 degrees C, then tumble drying on a low heat setting.

Maintenance

Refer to User Manual for specific details

Manufacturer/Country

Invacare / UK

Maintenance

Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

Models / Specifications