Tub Way is an adaptive tub conversion. The supplier will custom cut an opening in the tub wall to create easier step - through access into the tub. It converts the tub into an accessible shower. This can be done on any existing fiberglass, steel or cast iron bathtub.
General Details
Extra product information
Other services / products offered by supplier (Sydney Metropolitan area):
. Chips, cracks, scratches repair service
. Shower screens / removal & installations
. Sinks / basins
. Hand held shower heads (new installations)
. Ceramic tiles
. Shower chairs & benches
. Pedestal sinks
. Grab bar (new installations)
. Re - grout
. Appliances (resurfacing)
. Anti-slip service
Extra product information
* The Tub-Way creates a 460mm wide opening in the tub. The opening, however, can be made as wide or narrow as needed for the situation.
* The threshold is approx 125mm above the bathroom floor level
* The existing shower curtain will prevent water splashing out.
* Custom fitted components are used. These will exactly match any tub contour and thickness and will retain its factory made appearance. The finish is seamless.
* The conversion takes less than a day
* The Tub-Way is completely reversible and can be reversed in a day. A tub that been reversed retains its original strength and appearance, can be sat on, and can be filled to the top once more.
Manufacturer/Country
NSW, Australia
Warranty
Contact Supplier for Details
Websites
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Models / Specifications
Model Tub-Way Bathtub Conversion Systems: Gives easier access for existing bathtubs.
Suppliers (1)
Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.
All Suppliers
Tubway (Bondi Junction)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| P.O.A | unknown | unknown |
NSW Suppliers
Tubway (Bondi Junction)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| P.O.A | unknown | unknown |
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.