The Lolly switch is comprised of rectangular, plastic, black casing with a slightly smaller plastic activating surface positioned in the centre of the case. The activation force required varies between the centre and at the edges of the plate, with the maximum sensitivity at the corners. Auditory and tactile feedback is provided on activation and release. The switch casing has screw holes at each corner for mounting. A range of colours are available.
General Details
Extra product information
INTERFACE: 3.5mm male monoplug.
METHOD OF USE: This switch is suitable for use with a range of movements. Individualised positioning and mounting of the switch is required. Can be used to operate a range of equipment that is designed for switch control including communication devices, computer software, environmental control equipment and some toys.
OPERATION: The switch is operated by pressing anywhere on the surface of the activation plate.
COLOURS: Black base with activation plate available in red, orange, cream, blue, green, yellow or white.
FEEDBACK: Movement of the activation plate and auditory click.
MOUNT: The flat base of the switch allows it to be mounted with glue, screws or hook and loop tape to a commercial mount or flat surface.
Manufacturer/Country
Zygo, United States of America
Warranty
Contact Supplier for Details
Websites
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Models / Specifications
Model Lolly Switch: One model only, available in a range of colours
- Height Overall 10 mm
- Activation Pressure 85 g - 140 g (Maximum sensitivity in the corners)
- Weight Overall 30 mg
- Length Overall 95 mm
- Width Overall 40 mm
Features
Contact listed suppliers to confirm features, options and models available.
Set Up or Installation
-
Plug Type:
- 3.5mm / 1/8 Mono
Power Source
Standard Features Included
-
Operational feedback:
- Auditory click
- Hard tactile
-
Switch Modes:
- Direct
-
Switch Type:
- Mechanical
- Single
- Wired
-
Switch Material :
- plastic
Optional Accessories
Suppliers (1)
Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.
All Suppliers
Zyteq Pty Ltd (South Melbourne)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| Yellow: 262-0535-00 | 118.0 (Primary Authorised Dealer) | no | no | On shelf |
VIC Suppliers
Zyteq Pty Ltd (South Melbourne)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| Yellow: 262-0535-00 | 118.0 (Primary Authorised Dealer) | no | no | On shelf |
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.