Comcork Slip Resistant Flooring (PR07879)
https://ilcaustralia.org.au/products/7879
An Australian made slip resistant anti fatigue sheet flooring made from 70% cork bonded with PVC and rubber. This extremely hard wearing flooring has been designed for industrial and commercial applications
General Details
- Extra product information
COLOURS: Walk Easy and Low Profile are available in 20 colours, Poly Cork in 18.
INSTALLATION: Bonded to a clean, dry surface with approved adhesive. Butt-jointed or chemically welded seams using clear liquid PVC. Sub floor can be wood, concrete, metal, fibro, fibre glass, etc.
AREAS FOR USE: Indoor areas where a resilient, hardwearing, anti slip wet or dry floor covering is required - eg public transport, gymnasiums, kitchens, factories, shops, marine interiors, ramps. Suitable for use on domestic shower and bathroom floors. Limited outdoor application.
FEATURES: Resistant to ultra violet light. Resistant to fluids, chemicals, oils. Resistant to burning. Low toxicity when it does burn. Very hard wearing. Very flexible. Insulates against electricity, cold and heat [max. 70 degrees centigrade]. Slip resistant wet or dry. Resilient cushioned effect. Resistant to damage by pointed heels, trolley wheels and heavy objects. Dimensionally stable [will not stretch or ruck]. Absorbs sound.
MAINTENANCE: Once installed, it should be sealed immediately with a metalized sealer. Clean with mop and mild detergent. Need to reseal surface every 1 - 5 years. Wax polish will reduce slip resistant properties.
- Manufacturer/Country
- Contact Supplier for Details
- Websites
- - http://www.comcork.com.au/comcork/technical_resources/technical_data/technical_data/
Models / Specifications
- Model Comcork Slip Resistant Flooring.: Available in 3 surfaces to choose.
-
- Length of Roll 1800 mm
- Width of Roll 900 mm
- Thickness 3.2 mm
Suppliers (0)
Agents (0)
Importers (0)
Manufacturers (0)
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.