An electrically operated recliner chair with elevating legrest and stand-up function. The chair has a steel and timber frame, is fully upholstered and has a wall space saver function. It can be fully customised. A wide variety of fabrics available including fluid resistant vinyl.
Length overall, fully extended......1680 mm
Extra product information
The back consists of two individual dacron filled cushions with a zip. This allows for customisation of lumbar and neck support. The space between the seat and legrest is upholstered to give support behind the calves when the legrest is extended.
The wall spacesaver function allows the chair to be placed 100mm(4") from the wall.
The reclining and standing mechanism is operated by a pressure pad hand control attached to a cord that can be located on either side of the chair. Battery back up accessed through the hand control. (2x9volt batteries.)
The chair can be customised to allow for complete horizontal recline and independent leg rest control.
Backrest height, seat depth and height off the floor can be customised.
SEAT has high density foam padding.
ARMRESTS are padded and upholstered and come with slip covers with pockets.
LEGREST is padded and incorporated into the chair. It elevates to a position just above the level of the seat when fully reclined.
UPHOLSTERY is available in a range of fabrics including fluid resistant fabrics.
CUSTOMISATION of the amount and density of padding in the lumbar and neck sections of the backrest, the chair height and depth of seat are available. Customisation for complete horizontal recline and independent legrest control is also available.
twin motor (not wall saver)
Ezy-Rest, South Australia
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Models / Specifications
Model Henley: Manual or electric recline
- Width of Seat 510 mm
- Height of Seat from Ground 490 mm
- Depth of Seat 500 mm
- Seat to top of backrest 560 mm
- Length Overall 970 mm
- Load Capacity (supplier stated) 120 kg
Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.
|Supplier Code||Price & Price Notes||Hire?||Repair?||Availability|
|0.0 - 0.0||unknown||unknown|
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.