Bed Switch Mounts consist of a metal plate that is designed to slip under a mattress and an adjustable mounting arm designed to hold a switch. The Bed Switch Mount can be supplied with various switch mounts. The mount is also available in a model that has two mounting arms, designed to attach a switch to one and an environmental control unit or lightweight speech generating device to the other. Physical description: Large metal plate base Articulating joints with wing nut screws Adaptor on end for mounting plates Features: Light arm model made for switches Option of a durable arm for heavier devices Single arm model comprises of three sections joined by articulating joints Dual arm model comprises of two sections for each arm Articulating joints are movable and can move along length of the arm Can hold a call button, switch, puff switch tube, and other devices including Environmental control units Method of use: Place large plate under base of mattress Attach the mounting plate into the adaptor Adjust angles of arms by turning wing nut screws in each joint
General Details
Extra product information
The stem of the device can be adjusted by black screw knobs located on the arms of the mount.
A switch can be attached to the stem using a clamp. The clamp is adjustable via a twisting knob.
The mount attaches to the bed via a large metal plate which can be slipped under the mattress of the bed. It is held in place by the user's weight.
To install the mount, slip the metal plate under the mattress of the bed, adjust the switch location and tighten the clamp.
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Models / Specifications
Model Two mounting arms: Designed to attach a switch to one arm, and an environmental control or lightweight communication device to the other.
Model One mounting arm: One switch can be attached
Suppliers (1)
Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.
All Suppliers
Technical Solutions Australia Pty Ltd (Silvan)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
VIC Suppliers
Technical Solutions Australia Pty Ltd (Silvan)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.