A plasticA plastic, adhesive locking device designed to keep doors of fridge's and cupboards locked for safety. Can be used in the bathroom, kitchen or laundry.
General Details
Extra product information
The device can be attached to a fridge or cupboard via two adhesive strips located on the arms of the lock.
To attach, peel the adhesive strip cover off, attach one arm of the lock to the side of the cupboard and the other arm to the front of the fridge or cupboard door. The two arms are detachable and link together via a small clip.
To release the lock, push outward on the side release while opening the drawer/door. The adhesive arms will stay stuck to the fridge/cupboard.
Method of Use
To install:
- Thoroughly clean and dry all surfaces
- With the Angle Lock assembled, position the lock in the desired position. Mark with a pencil.
- While still assembled, peel off backing from adhesive tape and press firmly into position.
- Stronger adhesion is achieved by allowing adhesive to set for several hours. If possible, allow 24 hours for maximum adhesion.
To use:
- Push outward on the side release while opening the drawer/door etc.
- Locks automatically when drawer/door is closed.
- To remove, use rubber cement solvent, eucalyptus oil, or similar type of product.
- To relocate product, replace adhesive tape with 'strong' double sided tape.
Manufacturer/Country
South Australia
Warranty
Contact Supplier for Details
Websites
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Models / Specifications
Model Angle Locks: A plastic adhesive locking device for safety
Suppliers (2)
Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.
All Suppliers
Dreambaby ()
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
Kidsafe SA (North Adelaide)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
Unknown Suppliers
Dreambaby ()
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
SA Suppliers
Kidsafe SA (North Adelaide)
| Supplier Code | Price & Price Notes | Hire? | Repair? | Availability |
|---|---|---|---|---|
| 0.0 - 0.0 | unknown | unknown |
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.