Riley Office and Drafting Chair Range (PR09204)
Riley medium back task chair
https://ilcaustralia.org.au/products/9204
This chair features a moulded foam seat and backrest mounted on a plastic outer shell and seat pan. It has a reinforced nylon five star base with swivelling castors and is available with loop style armrests, height adjustable armrests or without armrests. It features a gas lift height adjustment mechanism and backrest height adjustment. The backrest angle can be adjusted and locked in any position. Drafting model with footring and medium back available.
General Details
- Extra product information
SEAT is made from a high density firm moulded foam which contains an air cell pocket under the ischial tuberosity area. The seat is molded to provide pelvic support.
ADJUSTMENTS are via three levers which provide independent adjustment of back tilt, seat tilt and height adjustment via gas lift. Levers are located on the left hand side of the chair underneath the seat.
ARMRESTS are height adjustable, sloping and made from firm rubber.
UPHOLSTERY is available in a wide range of fabrics, including an antibacterial canvas and leathers.
BASE is a five star base with 50mm (2") castors.
- Options
Restrictive castors - enable the castors to move while weight is placed on them but they have a mechanism that locks them in place when the weight is removed.
- Websites
- IG Ergonomic Solutions - http://www.igergonomics.com.au
Models / Specifications
- Model Riley medium back clerical (Ergo CHM G70) : medium back task chair
-
- Width of Seat 500 mm
- Seat to top of backrest 410 mm
- Width of Backrest 420 mm
- Depth of Seat 460 mm
- Height of Seat from Ground 450 mm - 590 mm
- Model Riley drafting chair : Medium back drafting chair
-
- Width of Seat 495 mm
- Depth of Seat 480 mm
- Seat to top of backrest 490 mm
- Width of Backrest 460 mm
- Height of Seat from Ground 560 mm - 820 mm
- Model Riley high back clerical (Ergo CHH G70) : high back task chair
-
Suppliers (0)
Agents (0)
Importers (0)
Manufacturers (0)
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.