General Details

Extra product information

MATERIALS: epoxy coated steel
METHOD OF OPERATION: fully automated raise, lower, fold and unfold. Stows inside the vehicle during transit.
POWER: Lifter is powered by the car battery. A separate power unit can be purchased an option. In the event of loss of power the lifter can be manually lowered and raised.
CONTROLS: hand held controller with rocker switches. One switch controls up and down movement, the other controls folding and unfolding. Standard control features also include an additional up/down switch mounted on the platform grab rails.
It can be entered from either a straight or 45 degree angle allowing for awkward parking positions in shopping centres and other places where access may be difficult.
SAFETY FEATURES: Once the `Up` button has been activated, the barrier (automatic roll stop) will rise to prevent the mobility device moving off the platform. The barrier will not de-activate until the unit is on the ground. The 300mm barrier nearest the vehicle keeps the user`s feet away from vehicle bumper bars, etc. The platform also has bilateral side barriers and hand rails.

Models
3 models are available: L955, L 917 & L 990

Options
remote control. Automatic door operation is also an option.

Installation

This product may be able to be installed at the rear or side door of the vehicle. Consideration must be given to the maximum height available at the doorway before ordering. The wheelchair lifter should be installed according to manufacturers direction by an authorised vehicle modifier.

Licensing and Insurance Requirements

You are legally required to advise your State licensing authority of any medical condition or disability that may impact on your driving. If not, you risk fines or legal action and your car insurance can be affected. You may need to provide medical reports or undergo driving tests. Modifications to your vehicle must be in line with the Australian safety and design rules. Fitting of wheelchair occupant restraints, child restraints and vehicle hoist ramps must meet relevant Australian Standards. Modifications should be done by suitably qualified vehicle modifiers. You will also need to inform your car insurer of any vehicle modifications. Your policy may become void if you do not do so. Contact the vehicle licensing / registration authority in your State for more information.

Manufacturer/Country

Braun Corporation / USA

Maintenance

Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

Models / Specifications