General Details
Extra product information
The hoist is constructed from epoxy coated rectangular steel tubing, with the seat, backrest and protective pads made from special flame retardant elastomer which does not absorb water.
The seat moves along the vertical mast. The person sits sideways on the chair. It has a removable backrest so the person can face either direction. A U shaped push handle is mounted on the mast, and two push handles are found on the flip down rails, allowing the hoist to be pushed from three sides.
The base is U shaped, with the two parallel legs angling out at the ends to provide foot space when pushing from the side and allowing it to fit around chairs and under beds. The top of the base has a slip resistant surface so it may be used as a footrest for the person in the hoist.
The foot operated control allows hands free operation. The lifter is belt driven, so there is no need for oiling parts.
May be used for bathing with baths with legs.
Options
- Mattress for stretcher
- Stainless bedpan holder for stretcher or chair
- Stainless bedpan
- Wallbracket for stretcher or chair
- Battery charger
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Suppliers (3)
Select a state below to view suppliers located in that state. Some suppliers may distribute to other states or nationally. Please click the supplier's name for more information on that supplier.
- All
- ACT
- NSW
- NT
- QLD
- SA
- TAS
- VIC
- WA
There are no suppliers of this product.
All Suppliers
| Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
| Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
| Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
VIC Suppliers
| Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
| Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
NSW Suppliers
| Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
QLD Suppliers
| Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
TAS Suppliers
| Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
| Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
WA Suppliers
| Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
SA Suppliers
| Supplier Code |
Price & Price Notes |
Hire? |
Repair? |
Availability |
|
0.0 - 0.0
|
unknown |
unknown |
|
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing, and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards see http://www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Disclaimer
Independent Living Centres Australia (ILCA) does not design or make products. ILCA cannot guarantee that all information given is correct. Prices shown are a rough guide. Some products may incur GST. Check with suppliers for up-to-date prices. The display of products at an ILCA centre, or details given in print, is only for your information. It is not a recommendation. You should always get professional advice when choosing products. The person choosing the product is responsible for their choice. ILCA takes no responsibility for people choosing equipment or services which will cause (or be alleged to have caused) loss or injury. You must follow the manufacturer’s or service provider’s instructions when using equipment or services.
